TOOL SHRINK Basic
TOOL SHRINK Basic is the leading developed entry-shrink technology for speed
Safety and flexibility for tool-holders.
FEATURES
-
Smart-coil solution (measures the resistance of the holder thickness) Low/optimized power consumption
-
Power consumption 7 - 15kw; no overheating
-
Fast shrinking and unclamping of ALL tool-holders from Ø 3 – 32mm
-
(40mm as well with the same coil)
-
HSS, Heavy metals / Carbide and MST; magnetic & or not tool-holders
-
-
Keypanel-Easy
-
EVO Pi-interface
-
(individual shrink cycles & for special/customized applications)
-
-
Air pressure connection from 3 to 6 bar
-
Max. shrinking length: 430 to 490mm
-
Long lifetime of the tool holders due to automatic shrinking cycles
-
High concentricity
-
Ergonomic design for enhanced safety during use
-
Shrink time approx. 2-7 seconds (depending on tool-holder shape)
-
Max. machine interface: HSK-A125
AVANTAGES
01.
Automatic adjusting kw & heating time for each holder
02.
Fast shrinking and unclamping of ALL tool-holders from Ø 3 – 32mm
03.
Reduced setup costs and downtime on tool replacement
04.
Long lifetime of the tool holders due to automatic shrinking cycles
05.
EVO Pi-interface +
Web-interface 4.0 with Online support
TOOL SHRINK Basic + Air cooling box* + Easy Height* + Air power cooling* (*options)
TECHNICAL DATA
POWER
20 Kw allowing shrink and unshrink of tool ∅ 3 to 32 mm
CAPABILITY
Tools shank ∅ 3 to 32 mm
MAX. SHRINKING LENGTH
430 to 490 mm
MAX. MACHINE INTERFACE
HSK-A125
DIMENSIONS
317 x 955 x 920 mm (W x D x H)
WEIGHT
45 kg
DELIVERY CONTENT
• Multi-function adapters for SK|BT|CAT 40 & 50; HSK 63|100; C6
• Smart coil with interchangeable stop discs
• Fans
• Protecting cone
• Pair of gloves
• Pi-Interface 4.0
• Online support interface
CONNECTIONS
Connections 3 Phase 400 - 480 V 16-25 A (EU/US)
EU
-
AC 3 Phase 400 V (+/-10%) + PE/23.8 A/50-60 Hz
-
AC 3 Phase 400 V (+/-10%) + PE + N/23.8 A/50-60 Hz
US
-
AC 3 Phase 440 -480 V + GND /23.8 A/50-60 Hz
For other voltage supply a transformer is required (transformer ordered separately)
Input voltage: 3 x 208 / 240 / 480 / 600 VAC + GND/28 A/50-60 Hz
Output voltage: AC 3 x 400 V + PE + N/28 A/50-60 Hz
-
3 meters cable is supplied
-
Air 3 to 6 bars / pipe ∅ 10 mm required
BACK TO BASIC: SHRINKFIT PRINCIPLE
The Shrinkfit holder’s inside diameter [1] is designed to be slightly smaller than the shank diameter [2] of the cutting tool.
When placed into the inductor [3] and the cycle is started, the inside bore is heated due to the localized high magnetic field [4] generate.
The inside ∅ will expands. The cutting tool shank can then be slipped easily into the holder. As the holder cools down, the resulting thermal contraction exerts a tremendous, uniform pressure around the entire surface of the tool shank.
