top of page
Banner 2024.jpg
logo evoset

TOOL SHRINK Evo

TOOL SHRINK Evo the most efficient shrink tool for speed, safety and flexibility for HSS and carbide tools

With individual and customized heating programs.

ToolShrink evo

FEATURES

​

  • EFFICIENCY

    • Optimized heating cycle avoiding overheating

    • Heating located on the clamping area

      • Faster cooling 

      • Limited heating transfer to the holder & cutter

      • Minimal energy consumption

    • Monobloc conception offering better precision

​​

  • USER FRIENDLY

    • Plug-and-Play

    • Automatic or manual heating cycles

    • Simple interface

​​

  • PERFORMANCE

    • Fast shrink and unshrink tools shank ∅ 3 to 32 mm

      • (and inch) in steel, HSS, heavy metal or carbide

    • Fast cooling of the tool and the tool holder

​​

  • ERGONOMIC

    • Cabinet* with space for water cooling unit*

Water cooling unit

制冷机组  – 可选产品

AVANTAGES

01.

REDUCE TOOL-CHANGE DOWNTIME

Don’t slow down your high accuracy machining operations with cumbersome tool holding solutions. ToolShrink Evo offers fast, ergonomic shrinking and unshrinking for steel, high-speed steel (HSS), heavy metal or carbide tools, reducing tool-change downtime. Featuring a heating unit with optimized automatic heating programs, the ToolShrink Evo uses an induction heat element to prevent overheating, minimize energy consumption and keep heat focused on the clamping area.

02.

SIMPLE, ERGONOMIC AND EASY TO USE 

In addition to convenient storage for stop rods, heat-focusing stoppers and finned support rings, the unit has an intuitive two-button operation pad and simple induction mechanism for ergonomic use.
Designed to perform shrinking cycles in two to seven seconds and cooling cycles in as fast as three minutes with the optional water-cooling system, the ToolShrink Evo makes tool setting easy. For specialized holders or specific heating cycles, operators have the possibility to access a secure web-based interface via WiFi or ethernet connection to create new manual programs.

03.

REDUCE MACHINING COSTS 

The rigidity established with ToolShrink allows the use of high cutting data, with drastic increases in productivity (especially when drilling) compared to other toolholder types. Additionally, with its superior holding force, concentricity and balance, the chip load is evenly distributed on the cutting edge. This extends tool, holder and spindle life. The reduced tool-change downtime contributes to considerable reduction in machining costs.

04.

NO MORE OVERHEATING 

With a fully protected transmission structure linked to an induction heating system, the ToolShrink Evo makes shrinkfit holders safe and easy to use. The focused heat of the induction unit and optimized pre-programmed cycles prevent overheating for long holder life. For further operator safety, the optional refrigeration unit provides a ready-to-use tool in less than five minutes.

EASY HEIGHT

Easy Shrink evo + air box cooling + extension cabinet
Easy height
Air Cooling Box

ACCESSORIES AND OPTIONS FOR TOOL SHRINK Evo

AIRBOX COOLING

Water cooling unit

WATER COOLING

TOOL SHRINK cabinet_edited.jpg

CABINET

技术数据

POWER

20 Kw allowing shrink and unshrink of tool ∅ 3 to 32 mm

CAPABILITY

Tools shank ∅ 3 to 32 mm 

MAX. SHRINKING LENGTH

430 to 490 mm

MAX. MACHINE INTERFACE

HSK-A125

DIMENSIONS

317 x 943 x 920 mm (W x D x H)

WEIGHT

50 kg

COOLING TIME

± 7 minutes with cooling cones

DELIVERY CONTENT

– 6 standard heat focusing stoppers for ∅3 to 32 mm
– 8 stop rods
– 2 cooling cones
– 1 pair of gloves
– 1 operating instructions

CONNECTIONS

Connections 3 Phase 400 - 480 V 16-25 A (EU/US)

EU​

  • AC 3 Phase 400 V (+/-10%) + PE/23.8 A/50-60 Hz

  • AC 3 Phase 400 V (+/-10%) + PE + N/23.8 A/50-60 Hz

US

  • AC 3 Phase 440 -480 V + GND /23.8 A/50-60 Hz

​

For other voltage supply a transformer is required (transformer ordered separately)
Input voltage: 3 x 208 / 240 / 480 / 600 VAC + GND/28 A/50-60 Hz
Output voltage: AC 3 x 400 V + PE + N/28 A/50-60 Hz

 

  • 3 meters cable is supplied

  • Air 3 to 6 bars / pipe ∅ 10 mm required

技术数据

制冷机组– 可选产品

COOLING TIME

± 1 minutes

EXTENSION TABLE

Allow storage of 5 contact bushes and 1 cooling bell

DIMENSIONS

Refrigeration Unit: 314 x 630 x 285 mm (W x D x H)

WEIGHT

Water cooling unit: 40 Kg

DELIVERY CONTENT

– Refrigeration unit
– Tubes support
– 2 cooling bells
– Extension table

CONNECTIONS

Directly on the specific plug on the ToolShrink® Evo

回到基础：热缩配合原理
热胀套的内径[1]设计为略小于刀柄直径[2]的切削工具。
放入电感时[3]循环开始后，由于局部高磁场，内孔被加热[4]generate.The inside ∅ will expands.然后可以轻松地将刀具柄滑入刀柄中。当刀柄冷却下来时，由此产生的热收缩会在刀柄的整个表面周围施加巨大而均匀的压力。

toolshrink evo shrinkfit
System Easyshrink Evo shrinkfit

RANGE OVERVIEW

  • ToolShrink Evo heating unit 

  • Optional refrigeration unit

 

YOUR BENEFITS

  • Extended toolholder life because of individual optimized heat settings

  • Ergonomic tool setting ensures safety due to the machine design

  • Fast and easy operation due to simple interface

  • Versatility and flexibility with an all-in-one solution

 

YOUR CHALLENGES

  • Setup times for high accuracy machining operations is too long for optimal, cost-effective processes

  • Overheated tool holder and broken cutting tools adds costs resulting in unnecessary scrapping of tool holders

 

OUR SOLUTIONS

  • Reduce tool-change downtime with our energy-efficient clamping, all-in-one shrinkfit unit with induction heating element and automated heating cycles

  • Ensure the longest possible tool life for your shrinkfit holders and tools with fully optimized heating and cooling cycles and accessories designed to easily remove broken tools

bottom of page